Hypertherm 420117 DEFLECTOR:DURAMAX LT

Product Description

The Hypertherm 420117 DEFLECTOR:DURAMAX LT is a genuine Hypertherm replacement part.

Compatibility

The Hypertherm 420117 DEFLECTOR:DURAMAX LT is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP

Installation

To install the Hypertherm 420117 DEFLECTOR:DURAMAX LT, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old deflector.
3. Install the new deflector.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 420117 DEFLECTOR:DURAMAX LT, please refer to the following troubleshooting tips:

• Check the deflector for damage. If the deflector is damaged, it will need to be replaced.
• Make sure the deflector is properly installed. If the deflector is not properly installed, it will not function properly.
• Check the power supply to the plasma cutter. If the power supply is not providing enough power, the deflector will not function properly.

Conclusion

The Hypertherm 420117 DEFLECTOR:DURAMAX LT is a genuine Hypertherm replacement part that is compatible with a variety of Hypertherm plasma cutters. By following the installation and troubleshooting tips in this document, you can ensure that the deflector is properly installed and functioning correctly.

Similar Parts

420115
DEFLECTOR:DURAMAX LT

120979
PowerMax 1250 Deflector

220325
Deflector:*T60/T80/T100-CE Finecut

220931
DEFLECTOR:PMX FINECUT

220955
DEFLECTOR:65/85/105 A

420399
Deflector, AIR T30, 15-30 A

228720
KIT:DURAMAX/DURAMAX HYAMP/MRT MACHINE TORCH CAP SENSOR SWITCH

420480
Shield, Duramax and Duramax Lock, 26-105 A, max control gouging

228719
KIT:DURAMAX/DURAMAX HYAMP/RT HAND TORCH CAP SENSOR SWITCH

420156
CAP:DURAMAX HYAMP OHMIC