Hypertherm 228194 CABLE BREAKAWAY SENSOR KIT

Description

The Hypertherm 228194 CABLE BREAKAWAY SENSOR KIT is a safety device that helps to protect the operator and equipment from injury in the event of a cable breakaway. The kit includes a sensor, a breakaway cable, and a mounting bracket.

The sensor is mounted to the plasma torch and detects when the cable is pulled away from the torch. When the cable is pulled away, the sensor sends a signal to the power supply, which then shuts off the power to the torch. This helps to prevent the operator from being injured by an electrical shock or from being struck by the torch.

The breakaway cable is a length of cable that is connected to the sensor and the power supply. The cable is designed to break away from the sensor if it is pulled too hard. This helps to prevent the torch from being damaged if the cable is snagged on something.

The mounting bracket is used to mount the sensor to the plasma torch. The bracket is made of durable metal and is designed to withstand the harsh conditions of a welding environment.

Features

• Helps to protect the operator and equipment from injury in the event of a cable breakaway
• Includes a sensor, a breakaway cable, and a mounting bracket
• Sensor detects when the cable is pulled away from the torch
• Sends a signal to the power supply, which then shuts off the power to the torch
• Breakaway cable is designed to break away from the sensor if it is pulled too hard
• Mounting bracket is made of durable metal and is designed to withstand the harsh conditions of a welding environment

Specifications

• Sensor dimensions: 2.5" x 1.5" x 1"
• Breakaway cable length: 6'
• Mounting bracket dimensions: 3" x 2" x 1"

Installation

1. Mount the sensor to the plasma torch using the mounting bracket.
2. Connect the breakaway cable to the sensor and the power supply.
3. Test the sensor by pulling on the breakaway cable. The power to the torch should shut off when the cable is pulled.

Maintenance

• Inspect the sensor and breakaway cable for damage before each use.
• Replace the sensor or breakaway cable if it is damaged.

Safety Precautions

• Wear proper safety gear when using the plasma torch.
• Be aware of the location of the breakaway cable and avoid pulling on it.
• Keep the sensor and breakaway cable away from flammable materials.

Similar Parts

97505-C1055A
QSAWFPNPNP -- Quickstop Breakaway, QS-200 model

MECO-0107
Pneumatic Torch Breakaway Mount

046078
Tube for CMP breakaway

228608
KIT:ARCGLIDE CABLE BREAK-AWAY SENSOR Prox Switch

428448
KIT:S-THC CABLE BREAK-AWAY SENSOR

228214
Sensor PHC with control module, lifter and 50 foot cable

428023
KIT:MAXPRO200 TO SENSOR TH

428022
KIT:MAXPRO200 TO INTERNAL SENSOR PHC

228719
KIT:DURAMAX/DURAMAX HYAMP/RT HAND TORCH CAP SENSOR SWITCH

228200
Kit: Sensor PHC Processor PCB Assy